[Home] [Downloads] [Search] [Help/forum]

Gammon Software Solutions forum

See www.mushclient.com/spam for dealing with forum spam. Please read the MUSHclient FAQ!

[Folder]  Entire forum
-> [Folder]  Electronics
. -> [Folder]  Microprocessors
. . -> [Subject]  Atmega bootloader programmer comments
Home  |  Users  |  Search  |  FAQ
Username:
Register forum user name
Password:
Forgotten password?
Atmega bootloader programmer comments

Postings by administrators only.

[Refresh] Refresh page

Posted by Paul_N   (3 posts)  [Biography] bio
Date Fri 10 Aug 2012 03:24 AM (UTC)  [ quote  ]
Message
Hi Nick --

I'm not quite sure where to comment about your boot loader programmer, but I want to thank you for taking the time to so thoroughly document your work on that project and others. 20 years ago I did a lot of bare-bones ASM programming on z80s and 8051s and haven't done much with microcomputers in the last 10 years, and I'm working with the AVR and Arduino systems to get familiar again.

There's a fair amount of New-Old-Stock of ATMEGA328 (no "P" suffix) in the inventory of one of the distributors here in the states that sells parts in singles at reasonable prices. I was able to modify your programming sketch to include the 328 signature, but if you ever revise your program you may want to include the 328 in your version so that others can use the 328 with your program.

I wonder if you have any plans to do a posting for a HV parallel programer to restore incorrect fuse settings. In googling I see that a lot of people are concerned about "high voltage" needed for a parallel programmer. But it seems to me that the current is only 10 to 15 mA. And that the 12V power source could be provided by either a little step up voltage converter from 5V, or just two 9V batteries in series that feed a 12V linear regulator to drop the 18 to 12.

Anyway, thanks again for all your great work. I find it a valuable learning tool as well as good tools in and of themselves.

Best wishes,

Paul
[Go to top] top
Posted by Nick Gammon   Australia  (18,769 posts)  [Biography] bio   Forum Administrator
Date Reply #1 on Sat 11 Aug 2012 12:28 PM (UTC)  [ quote  ]
Message
Quote:
I was able to modify your programming sketch to include the 328 signature ...


Which is, to save me looking it up?

Quote:

I want to thank you for taking the time to so thoroughly document your work on that project and others ...


Thanks for that. :)

Quote:

I wonder if you have any plans to do a posting for a HV parallel programer to restore incorrect fuse settings.


There are a few available already for around the $30 mark I believe.

You can get an AVR Dragon for $US 51, it isn't that difficult an exercise.

So, not really. It would be quite a bit of work just to save a few dollars.

The bootloader programmer was done with off-the-shelf stuff (another Arduino) so I thought that had more general appeal.
- Nick Gammon

www.gammon.com.au, www.mushclient.com
[Go to top] top
Posted by Paul_N   (3 posts)  [Biography] bio
Date Reply #2 on Sun 12 Aug 2012 03:53 AM (UTC)  [ quote  ]
Message
For the 328, the second line is what I added right after your 328P definition...

{ { 0x1E, 0x95, 0x0F }, "ATmega328P", 32 * kb, 512 },
{ { 0x1E, 0x95, 0x14 }, "ATmega328", 32 * kb, 512,

So the 328 (no p suffix) sig is 0x1E, 0x95, 0x14


On a no-so-related topic, are there any low end logic analyzers that use a PC for processing and display that you like? Perhaps one of those gizmos that are implemented with some sort of a USB dongle with 8 or 16 parallel inputs with the other end of the USB going to a PC?

I'm new to your site so you may have mentioned that elsewhere and I just haven't yet seen it.

thanks,

Paul
[Go to top] top
Posted by Nick Gammon   Australia  (18,769 posts)  [Biography] bio   Forum Administrator
Date Reply #3 on Sun 12 Aug 2012 09:02 PM (UTC)  [ quote  ]
Message
I use this one practically every day:

http://www.saleae.com/logic/

It's $US 149 for the 8-channel one but worth every cent.

Works on Mac, Windows, Linux, and the supplied software is very easy to use. You can download the software from their site for free and try it in simulation mode to see what it is like.
- Nick Gammon

www.gammon.com.au, www.mushclient.com
[Go to top] top
Posted by Paul_N   (3 posts)  [Biography] bio
Date Reply #4 on Mon 13 Aug 2012 01:23 AM (UTC)  [ quote  ]
Message
Awesome! I'll check it out. Thanks.
[Go to top] top
Posted by Shemul3091   (1 post)  [Biography] bio
Date Reply #5 on Sun 14 Oct 2012 09:06 PM (UTC)  [ quote  ]
Message
Sir,

I have bought a few atmega 48PA, 88PA, 168PA's from market. I am a newbie and really looking for help how to bootload and upload sketch into these chips. Luckily I do own a Arduino UNO having a atmega 328. But its not helping much.

It would be a great help if you please provide me hex files for 48PA, 88PA, 168PA .

Thanks in advance.

shemul.
[Go to top] top
Posted by Nick Gammon   Australia  (18,769 posts)  [Biography] bio   Forum Administrator
Date Reply #6 on Mon 15 Oct 2012 02:04 AM (UTC)  [ quote  ]
Message
Could you post this question on the Arduino forum please?

http://arduino.cc/forum/
- Nick Gammon

www.gammon.com.au, www.mushclient.com
[Go to top] top
Posted by Matheusbrat   (1 post)  [Biography] bio
Date Reply #7 on Mon 29 Oct 2012 02:16 AM (UTC)  [ quote  ]
Message
Hey Nick,

Really thanks. It was very useful to me.

I have a question too, I just get my USB ASP (chinese) but every time I try to program with it, I receive a message complaining about SCK and firmware update. I want to update it to the last firmware, but I'm afraid that maybe chinese did some modification on their firmware.

So I was thinking to dump all the memory and save it, so if I have any problems I can go back to that version.

I was thinking to add a function dumpMemory.

###

void dumpMemory() {
unsigned long addr = signatures [foundSig].loaderStart;
unsigned long flash = signatures [foundSig].flashSize;

Serial.println("DUMP");

for (unsigned long i = 0; i < flash ; i++) {
byte found = readFlash (addr + i);
showHex(found);
}

}

###

All the time that I use it, it prints a lot of 0xFF, that make sense, since it is not full, but it keeps freezing on the end.

Any ideas why? Is it possible to do this kind of backup?

Thank you again,
Best Regards,
Matheus
[Go to top] top
Posted by Nick Gammon   Australia  (18,769 posts)  [Biography] bio   Forum Administrator
Date Reply #8 on Mon 29 Oct 2012 03:21 AM (UTC)  [ quote  ]
Message
My sketch here lets you save program memory to disk (an SD card):

http://www.gammon.com.au/forum/?id=11638

However your suggested function looks sound.

I prefer you to ask these question on the Arduino forum. You can send me a link via personal message on that forum if you like.

http://arduino.cc/forum/
- Nick Gammon

www.gammon.com.au, www.mushclient.com
[Go to top] top

The dates and times for posts above are shown in Universal Co-ordinated Time (UTC).

To show them in your local time you can join the forum, and then set the 'time correction' field in your profile to the number of hours difference between your location and UTC time.

1,421 views.

Postings by administrators only.

[Refresh] Refresh page

Go to topic:           Search the forum

[Go to top] top

[Home]

Written by Nick Gammon - 5K

Comments to: Gammon Software support
[RH click to get RSS URL] Forum RSS feed ( http://www.gammon.com.au/rss/forum.xml )

[Best viewed with any browser - 2K]    [Internet Contents Rating Association (ICRA) - 2K]    [Web site powered by FutureQuest.Net]