Notice: Any messages purporting to come from this site telling you that your password has expired, or that you need to verify your details, confirm your email, resolve issues, making threats, or asking for money, are
spam. We do not email users with any such messages. If you have lost your password you can obtain a new one by using the
password reset link.
Due to spam on this forum, all posts now need moderator approval.
Entire forum
➜ MUSHclient
➜ MXP and Pueblo
➜ Dupe screen feature
It is now over 60 days since the last post. This thread is closed.
Refresh page
| Posted by
| Ian Kirker
(30 posts) Bio
|
| Date
| Sat 07 Aug 2004 10:18 PM (UTC) |
| Message
| I don't suppose, in a future version, there could be a mode whereby there are two output screens, one with the MXPised screen and one with the output showing all the tags?
It'd be awfully handy for debugging. | | Top |
|
| Posted by
| Eos
USA (52 posts) Bio
|
| Date
| Reply #1 on Sat 07 Aug 2004 10:24 PM (UTC) |
| Message
| Turn your MXP debug level to "The Lot". Everything gets output in a separate notepad window.
| | Top |
|
| Posted by
| Ian Kirker
(30 posts) Bio
|
| Date
| Reply #2 on Sat 07 Aug 2004 11:24 PM (UTC) |
| Message
| | I mean all the tags in context, as in, what you would see if the MUD was sending tags with your text and MUSHClient wasn't interpreting them. | | Top |
|
| Posted by
| Eos
USA (52 posts) Bio
|
| Date
| Reply #3 on Sun 08 Aug 2004 05:24 AM (UTC) |
| Message
| Then you essentially want to be able to 'view source' on the MUD.
Clarity helps.
| | Top |
|
| Posted by
| Flannel
USA (1,230 posts) Bio
|
| Date
| Reply #4 on Sun 08 Aug 2004 06:01 AM (UTC) |
| Message
| You could use "debug packets" and then youd see everything. Which, if you were debugging, would come in handy, albeit a little unweildy at times.
If you just want to see the tags, you can turn MXP off clientside, then MC wont interperate tags.
Although, I will say this is hardly a side by side as you want.
We can currently open a new window (Windows > New Window) and youll duplicate the output and stuff, but then the only thing you can do to each independantly is pause it.
It would make sense to be able to turn one into a raw mode. However, this would be a coding nightmare, since first you'd have to figure out how 'raw' you wanted, with ANSI being interpreted or not, and then you'd have to deal with lines being different lengths, and deal with plenty of other descrepencies.
Debug Packets might be your best bet... Or actually, you can probably whip up a quick script with plugin callbacks to write everything to a text file (FSO), considering you wont need color, or anything, that should be sufficient. |
~Flannel
Messiah of Rose
Eternity's Trials.
Clones are people two. | | Top |
|
The dates and times for posts above are shown in Universal Co-ordinated Time (UTC).
To show them in your local time you can join the forum, and then set the 'time correction' field in your profile to the number of hours difference between your location and UTC time.
17,742 views.
It is now over 60 days since the last post. This thread is closed.
Refresh page
![[Go to top]](/images/gototop.gif)
top