[Home] [Downloads] [Search] [Help/forum]

Gammon Software Solutions forum

See www.mushclient.com/spam for dealing with forum spam. Please read the MUSHclient FAQ!

[Folder]  Entire forum
-> [Folder]  MUSHclient
. -> [Folder]  General
. . -> [Subject]  Difficulty in connecting
Home  |  Users  |  Search  |  FAQ
Username:
Register forum user name
Password:
Forgotten password?
(New message)
Subject: Difficulty in connecting
Name:
Your forum user name.
Register forum user name
Password:
Your forum password.
Forgotten password?
Message:
Message to be posted (in English, please).
Forum codes:
Check this if your message uses 'forum codes' or templates (auto-detected for new posts).
Forum codes Templates

Save this message ...

Subject review (reverse sequence)

Posted by Onoitsu2   USA  (246 posts)  [Biography] bio
Date Sat 22 Jul 2006 01:52 PM (UTC)  [ quote  ]
Message
I would try using a socks proxy server find one closest to where you work...

http://www.samair.ru/proxy/socks.htm
OR
http://nntime.com/socks/


They have them all around the world, and most of the ones with oddball ports work, and they all are supposed to be anonymous proxies, and some even have a port 80 connection, so that they can route through your port 80 to the mud's port. YOU WILL MOST LIKELY HAVE TO TRY 5 - 10 TO GET ONE THAT WORKS. TRY BOTH SOCKS 4 AND 5 ON EACH ONE YOU TRY, YOU MIGHT GET LUCKY.

Try that, and an extra feature is if your mud does not allow mplaying (multi-character playing) this makes it so that the character connected using the proxy 'appears' to be logged from the proxy server IP and not your own.

Enjoy :)

Onoitsu2
[Go to top] top
Posted by Nick Gammon   Australia  (18,797 posts)  [Biography] bio   Forum Administrator
Date Sat 22 Jul 2006 06:03 AM (UTC)  [ quote  ]
Message
There might not be a next step. For some reason they may not want you to play your MUSH at work.
- Nick Gammon

www.gammon.com.au, www.mushclient.com
[Go to top] top
Posted by Rasputin   (2 posts)  [Biography] bio
Date Sat 22 Jul 2006 05:48 AM (UTC)  [ quote  ]
Message
Nope, I've been trying for the last little bit, and I'm not able to connect at all, even with raw telnet. It's very likely that we do have some sort of a firewall. So, I'm not sure what the next step is to work around that (if it's even possible.)
[Go to top] top
Posted by Nick Gammon   Australia  (18,797 posts)  [Biography] bio   Forum Administrator
Date Sat 22 Jul 2006 12:36 AM (UTC)  [ quote  ]
Message
Connection is refused when the other end sends a NAK (negative acknowlegement), however a timeout is when no response is received (neither positive nor negative).

It is certainly possible for the firewall to block in such a way that the NAK is not received, giving the symptoms you describe.

Ping and tracert use a different protocol (ICMP) and the fact that they work, or not, does not necessarily prove a huge amount. The firewall may allow ICMP messages through, but block TCP messages for the MUD port.
- Nick Gammon

www.gammon.com.au, www.mushclient.com
[Go to top] top
Posted by Zeno   USA  (2,868 posts)  [Biography] bio   Moderator
Date Sat 22 Jul 2006 12:21 AM (UTC)  [ quote  ]
Message
Might be a firewall blocking any telnet connections. I know my college does that.

Can you connect using telnet at all?
Zeno McDohl,
Owner of Bleached InuYasha Galaxy
http://www.biyg.org
[Go to top] top
Posted by Rasputin   (2 posts)  [Biography] bio
Date Sat 22 Jul 2006 12:11 AM (UTC)  [ quote  ]
Message
I wanted to hop onto a MUSH and check my +mail from work. At home, I connect with no difficulties, but when I attempt to connect from work, the connection continually times out with the error message:

Unable to connect to "Chronicles", code = 10060 (Connection timed out)
Error occurred during phase: Connecting to world: 216.136.9.8, port 8810

I ran a ping, and 4 packets were sent and 4 packets were received with an average round trip of 26ms.

I ran a tracert, and it ran 12 traces. The first two went through in <1ms, the next 9 timed out, and the last went through in 26 ms.

I thought maybe it's some kind of firewall issue, but I'm not certain, given that the connection is not being refused, it's just timing out.

Any thoughts?
[Go to top] top

The dates and times for posts above are shown in Universal Co-ordinated Time (UTC).

To show them in your local time you can join the forum, and then set the 'time correction' field in your profile to the number of hours difference between your location and UTC time.

1,461 views.

[Reply to this subject]  Reply to this subject   [New subject]  Start a new subject   [Refresh] Refresh page

Go to topic:           Search the forum

[Go to top] top

[Home]

Written by Nick Gammon - 5K

Comments to: Gammon Software support
[RH click to get RSS URL] Forum RSS feed ( http://www.gammon.com.au/rss/forum.xml )

[Best viewed with any browser - 2K]    [Internet Contents Rating Association (ICRA) - 2K]    [Web site powered by FutureQuest.Net]