Gammon Software Solutions forum

See www.mushclient.com/spam for dealing with forum spam. Please read the MUSHclient FAQ!

Entire forum
SMAUG
Running the server
Needing help

Home \| Users \| Search \| FAQ
Username:	Register forum user name
Password:	Forgotten password?

(New message)

Subject:	Needing help
Name:	Your forum user name. Register forum user name
Password:	Your forum password. Forgotten password?
Message:	[quote=Shichiroji] Hiya everyone, Been a long while since I last posted on here, I gave up for awhile and decided yesterday to try again for something to do. Been having some major issues with getting cygwin to install correctly and even having some issues with starting the mud as well, I figured since it will actually end up with running the server to start here first. First off, Cygwin, its not wanting to install correctly, been having some major issues with package problems. Keep trying to install everything to try and fix it, but nothings working, I uninstalled everything and tried a full install again. Still having some problems. As soon as this install, kicks through a little more, I'll put the error I'm having up, I know some of them to start. Been looking through the forum for help, and haven't really found anything over the last few hours, thats why I'm making the new post. Package issues no package boxes.sh exit code 2 exim.sh exit code 1 mined.sh exit code 1 some others popped up on the last attempted install, if they come up again, I'll let you know, but those 3 are the ones giving me the most trouble EDIT side note, running windows vista 32bit Re:EDIT here is the full error I got this time around Package: No package boxes.sh exit code 2 exim.sh exit code 1 mined.sh exit code 1 passwd-grp.sh exit code 1 postinstall-ec-fonts-mftraced.sh exit code 1 Thanks for the help. [/quote] Message to be posted (in English, please).
Forum codes:	Check this if your message uses 'forum codes' or templates (auto-detected for new posts). Forum codes Templates

Save this message ...

Subject review (reverse sequence)

Posted by

Conner USA (381 posts)

bio

Date

Wed 25 Aug 2010 02:53 AM (UTC) [ quote ]

Message

You can't set an area to repop instantly as far as I know, you could set it to one minute but that's got potential to give you an awfully crowded area if you're not careful about it. You're better off, especially if you really want your mobs to come back instantly, in using triggers on the specific mobs. Perhaps a death trigger set to have another static mob mpinvoke the now deceased mob's vnum at the location's vnum.

-=Conner=-
--
Come test your mettle in the Land of Legends at telnet://tcdbbs.zapto.org:4000
or, for a little family oriented medieval fun, come join us at The Castle's Dungeon BBS at telnet://tcdbbs.zapto.org
or, if you just want information about either, check our web page at http://tcdbbs.zapto.org

top

Posted by

Shichiroji USA (22 posts)

bio

Date

Wed 25 Aug 2010 01:54 AM (UTC) [ quote ]

Message

Ok, well, updating everything again seemed to work...sort of. I'm still running with those errors but I was finally able to get the mud up and running. I did get the

limit: command not found
ulimit: command not found

errors as well, but everything seems to be running fine.

Ok, now an actually coding question if you don't mind, wanting to put the respawn timers back to instant for the mobs, and its been like 4 years since I messed with building at all, where in the files(assuming area files), will I need to go to change the respawn timer? Thanks.

top

Posted by

Shichiroji USA (22 posts)

bio

Date

Tue 24 Aug 2010 11:30 PM (UTC) [ quote ]

Amended on Tue 24 Aug 2010 11:40 PM (UTC) by Shichiroji

Message

Hiya everyone,
Been a long while since I last posted on here, I gave up for awhile and decided yesterday to try again for something to do. Been having some major issues with getting cygwin to install correctly and even having some issues with starting the mud as well, I figured since it will actually end up with running the server to start here first. First off, Cygwin, its not wanting to install correctly, been having some major issues with package problems. Keep trying to install everything to try and fix it, but nothings working, I uninstalled everything and tried a full install again. Still having some problems. As soon as this install, kicks through a little more, I'll put the error I'm having up, I know some of them to start. Been looking through the forum for help, and haven't really found anything over the last few hours, thats why I'm making the new post.

Package issues
no package
boxes.sh exit code 2
exim.sh exit code 1
mined.sh exit code 1

some others popped up on the last attempted install, if they come up again, I'll let you know, but those 3 are the ones giving me the most trouble

EDIT side note, running windows vista 32bit

Re:EDIT here is the full error I got this time around

Package: No package
boxes.sh exit code 2
exim.sh exit code 1
mined.sh exit code 1
passwd-grp.sh exit code 1
postinstall-ec-fonts-mftraced.sh exit code 1

Thanks for the help.

top

The dates and times for posts above are shown in Universal Co-ordinated Time (UTC).

To show them in your local time you can join the forum, and then set the 'time correction' field in your profile to the number of hours difference between your location and UTC time.

1,627 views.

Reply to this subject Start a new subject Refresh page

Go to topic: Search the forum

top

Comments to: Gammon Software support
Forum RSS feed ( http://www.gammon.com.au/rss/forum.xml )