[Home] [Downloads] [Search] [Help/forum]

Gammon Software Solutions forum

See www.mushclient.com/spam for dealing with forum spam. Please read the MUSHclient FAQ!

[Folder]  Entire forum
-> [Folder]  MUSHclient
. -> [Folder]  Python
. . -> [Subject]  Python problem - locating parse interface
Home  |  Users  |  Search  |  FAQ
Username:
Register forum user name
Password:
Forgotten password?

Python problem - locating parse interface

[Reply to this subject]  Reply to this subject   [New subject]  Start a new subject   [Refresh] Refresh page


Posted by Artel   USA  (63 posts)  [Biography] bio
Date Sat 09 Jan 2010 10:12 AM (UTC)  quote  ]
Message
I am getting the following error when I attempt to enable scripting in MUSHclient using Python:


Error number: -2147467262
Event:        locating parse interface
Description:  Error -2147467262 occurred when locating parse interface:



No such interface supported


Called by:    


I can't find any information about this error. Any help would be greatly appreciated!

Info: I'm using Python 2.6.2 64-bit from python.org (it is working fine for everything outside of MUSHclient). I have installed the corresponding pywin32 package and have run pyscript.py. I'm using MUSHclient 4.44, though I will go ahead and try 4.45 now (doesn't seem like it would change anything.)

Artel.
[Go to top] top

Posted by Worstje   Netherlands  (867 posts)  [Biography] bio
Date Reply #1 on Sat 09 Jan 2010 06:31 PM (UTC)  quote  ]
Message
Install the 32-bit package and your problem ought to be solved. MUSHclient is a 32-bit application and as such can only 'utilize' other 32-bit applications.

In general, I advise you use 32-bit programs only on your pc, unless you have stuff that really needs a 64-bit work environment, which is truly rare. 32-bit is still more optimized behind the scenes and takes less memory - whereas 64-bit at this time only really shines if that specific application needs to address more than 2GB+ memory.
[Go to top] top

Posted by Artel   USA  (63 posts)  [Biography] bio
Date Reply #2 on Sat 09 Jan 2010 11:41 PM (UTC)  quote  ]
Message
That worked. Thank you.

Artel.
[Go to top] top

The dates and times for posts above are shown in Universal Co-ordinated Time (UTC).

To show them in your local time you can join the forum, and then set the 'time correction' field in your profile to the number of hours difference between your location and UTC time.


2,556 views.

[Reply to this subject]  Reply to this subject   [New subject]  Start a new subject   [Refresh] Refresh page

Go to topic:           Search the forum


[Go to top] top

[Home]

Written by Nick Gammon - 5K

Comments to: Gammon Software support
[RH click to get RSS URL] Forum RSS feed ( http://www.gammon.com.au/rss/forum.xml )

[Best viewed with any browser - 2K]    [Internet Contents Rating Association (ICRA) - 2K]    [Web site powered by FutureQuest.Net]