Search FAQ

Gammon Forum

Notice: Any messages purporting to come from this site telling you that your password has expired, or that you need to verify your details, confirm your email, resolve issues, making threats, or asking for money, are spam. We do not email users with any such messages. If you have lost your password you can obtain a new one by using the password reset link.
 Entire forum ➜ Electronics ➜ G-Pascal ➜ G-Pascal 64K RAM PCB + Programmer

G-Pascal 64K RAM PCB + Programmer

Posting of new messages is disabled at present.

Refresh page


Posted by Mike Mclaren   (2 posts)  Bio
Date Thu 24 Aug 2023 06:01 AM (UTC)
Message
I love this G-Pascal package. Thank you. Well done.

I have a 2.8"x4.0" G-Pascal compatible PCB design with 64K RAM and optional 28C256 or 39SF010A ROM. A Nano is fitted on-board and provides a 1, 2, 4, or 8 MHz clock, an econo' reset function, and in-circuit ROM programming. If you build the board without the ROM the Nano will load the G-Pascal image into 64K RAM at start-up.

Is there a way to post pictures/drawings here?

picture 1: http://forum.6502.org/download/file.php?id=18790&mode=view
picture 2: http://forum.6502.org/download/file.php?id=18788&mode=view
Top

Posted by Nick Gammon   Australia  (23,122 posts)  Bio   Forum Administrator
Date Reply #1 on Thu 24 Aug 2023 08:07 AM (UTC)

Amended on Fri 25 Aug 2023 02:59 AM (UTC) by Nick Gammon

Message
No, but I copied them to my server, so here they are:




- Nick Gammon

www.gammon.com.au, www.mushclient.com
Top

Posted by Nick Gammon   Australia  (23,122 posts)  Bio   Forum Administrator
Date Reply #2 on Thu 24 Aug 2023 08:09 AM (UTC)
Message
Nice work. :)

- Nick Gammon

www.gammon.com.au, www.mushclient.com
Top

Posted by Nick Gammon   Australia  (23,122 posts)  Bio   Forum Administrator
Date Reply #3 on Thu 24 Aug 2023 08:10 AM (UTC)
Message
Any screenshots/photos of G-Pascal in operation?

- Nick Gammon

www.gammon.com.au, www.mushclient.com
Top

Posted by Mike Mclaren   (2 posts)  Bio
Date Reply #4 on Thu 24 Aug 2023 08:35 AM (UTC)

Amended on Sun 27 Aug 2023 02:58 AM (UTC) by Mike Mclaren

Message
I took this screenshot because I was geeked to see G-Pascal running with an 8-MHz clock and 38400 baud bit-banged serial after replacing the Rockwell CPU and VIA with WDC parts.

Picture 3: http://forum.6502.org/download/file.php?id=17073&mode=view

Here's another board photo. The only part I haven't found on-the-shelf at distributors is the 'skinny' 64K RAM but they seem plentiful and relatively inexpensive from an AliExpress vendor (5 for $3.36, including shipping to USA).

Picture 4: http://forum.6502.org/download/file.php?id=18789&mode=view
Top

Posted by Nick Gammon   Australia  (23,122 posts)  Bio   Forum Administrator
Date Reply #5 on Fri 25 Aug 2023 03:00 AM (UTC)
Message



- Nick Gammon

www.gammon.com.au, www.mushclient.com
Top

The dates and times for posts above are shown in Universal Co-ordinated Time (UTC).

To show them in your local time you can join the forum, and then set the 'time correction' field in your profile to the number of hours difference between your location and UTC time.


4,487 views.

Posting of new messages is disabled at present.

Refresh page

Go to topic:           Search the forum


[Go to top] top

Information and images on this site are licensed under the Creative Commons Attribution 3.0 Australia License unless stated otherwise.